It is a possible way to plug a microphone directly into the speakers. You can plug the microphone directly, when you want to connect your speaker with a microphone.
Speaking, there are multiple devices and gain stages before a microphone signal is sent to a loudspeaker for projected sound.
However, it is possible to connect a microphone directly into a speaker. Here we see the tips and tricks to connect the microphone into the speaker.
Tricks to connect a microphone directly to a loudspeaker
To plug a microphone into a speaker, we should identify the speaker’s input connector and then simply use the proper cable adapters to send the microphone output signal to the speaker’s input.
After finding the input and output connector plug a microphone into speakers. We should have an amplification to make a better signal.
Connect amplifier with the microphone and the speaker. We can use the Auxiliary port, instead of using the amplifier. An auxiliary port is used for a standard communications port.
Aux is an interface between the microphone and the speaker. It allows the auxiliary input of audio signals for the MP3 players, headphones, and other devices. Plug a microphone into the aux to better communicate.
Powered loudspeakers will have a microphone input. So, it is easy to connect a microphone directly to the speaker and have the amplifier of the speaker for better communication and boost the level of signal to speaker level.
Microphone inputs are generally XLR, when we are using the XLR inputs; we just need an XLR cable to connect the microphone to the loudspeaker. Using the External Line Return, we can directly connect a microphone to a speaker.
Sometime we will use the wireless microphone to give input to the speaker. We can also have a wireless speaker to produce the output, which is get from the microphone.
When we use the wireless speaker and microphone, we just connect the microphone and speaker by the Bluetooth. Bluetooth speaker works in a digital protocol.
A microphone is just a mike in the raw mode without producing an analog output. If you need an analog microphone in the digital protocol you need an ADC, which is analog to digital converter.
Then you can directly connect the microphone to the speaker.
Conclusion
The input of the microphone is an XLR input, which means an XLR microphone can be connected to this loudspeaker by a single XLR cable.